Calculators for gravel, mulch, topsoil, and sod
Order the right amount of material for a US yard. Each tool turns a measured area into cubic yards, short tons, bags, or pallets, and shows the arithmetic beside the result.
- Rectangle, circle, and triangle areas, with depth in inches.
- Densities you can replace with the figure on a supplier ticket.
- Bag counts for 0.5, 2, and 3 cubic foot bags, plus common weight bags.
- The math runs in your browser. Measurements are not sent to a server.
Tools
Gravel calculator
Pea gravel, crushed stone, and river rock, with a density you can replace with the figure on your supplier’s ticket.
Cubic yards, cubic feet, short tons, and bags.Mulch calculator
Bed coverage at a 2 to 4 inch depth, with bag counts for the sizes sold at US garden centers.
Cubic yards plus 2 and 3 cubic foot bags.Topsoil calculator
Screened topsoil, garden mix, and fill dirt for beds, raised beds, and lawn topdressing.
Cubic yards, short tons, and bags of soil.Sod calculator
Order area with a waste allowance, using a pallet size and roll size you can change to match the farm.
Square feet, pallets, and rolls.How do these calculators turn a measurement into an order?
A cubic yard is 27 cubic feet. Spread an inch deep, that yard covers 324 square feet. Depth in inches divided into 324 is the coverage of one yard, which is why a 3 inch mulch layer covers 108 square feet per yard. Themethodology writes this out with the unit conversions and the density used for each material.
Bulk gravel and soil are often sold by the ton as well as by the yard. A short ton is 2,000 pounds. It matches a cubic yard only for a material that weighs about 74 pounds per cubic foot, which is lighter than ordinary gravel or topsoil. The calculators keep yards and tons as separate results and let you edit the density.
Sod is an area, not a volume. The sod calculator stays in square feet and converts that area into pallets and rolls using sizes you can change, because farms do not all cut the same pallet.